Audi A3 1997 Manual page 228

Audi A3 1997 ➤
Heating, Air Conditioner - Edition 06.2000
Fig.1 -> Assembling evaporator housing
- Screw together the two halves of the housing at points -B- with suitable bolts -A-.
Fig.2 -> Attaching seal to evaporator refrigerant lines
- Seal refrigerant lines -C- to the two halves of housing -B- with seal -A-.
Fig.3 -> Attaching seal to evaporator
- Seal top and both sides of evaporator -A- to evaporator housing with seal -B-.
Note:
The underside of the evaporator must not be sealed (so that condensation water can drain off).
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
222
87 - Air conditioning