Dismantle And Assemble Air Conditioner (Version 1) - Audi A3 1997 Manual

◆ The heat exchanger has been installed in vehicles with map-controlled cooling (to be introduced gradually
as of model year 1999 vehicles with 1.6 l engine) which has been adapted to the different usage conditions.
The following must be noted for this heat exchanger:
- -> The flow direction of the refrigerant in the heat exchanger is not marked at the refrigerant connections
(observe feed and return flow).
- The heat exchanger components carrying refrigerant are produced entirely from metal due to the higher
feed refrigerant temperature.
=> Parts List

12 - Dismantle and assemble air conditioner (version 1)

12.1 - Dismantle and assemble air conditioner (version 1)
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Notes:
◆ As of June 1997, AC version "1" has been gradually phased out of production and AC version "2" gradually
phased in.
Heating, Air Conditioner - Edition 06.2000
11.2 - Removing and installing the air conditioner heat exchanger
Audi A3 1997 ➤
213