Audi A3 1997 Manual page 154

Audi A3 1997 ➤
Heating, Air Conditioner - Edition 06.2000
-> Fig.1 Loosening and tightening hexagon bolt
- Counterhold using a commercially available 2-hole pin wrench -A- (pin-ø 4 mm).
- Tighten bolt to 15 Nm.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
-> Fig.2 Detaching clutch plate
- Counterhold with a commercially available 2-pin wrench -A-.
-> Fig.3 Removing pulley
- Remove the felt ring.
- Fit the special tool V.A.G 1719/1.
- Position the two-arm puller -B- on the shoulder-A-, to prevent any damage to the pulley.
148
87 - Air conditioning