Audi A3 1997 Manual page 147

◆ Checking and adjusting gap width =>Fig.
4 Circlip
◆ Renew
◆ Install on correct side (flat side facing compressor).
◆ Ensure correct seating in groove.
5 Pulley
◆ Detaching =>Fig.
◆ Clean contact surface before installation.
6 Circlip
◆ Renew
◆ Install on correct side (flat side facing compressor).
◆ Ensure correct seating in groove.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
3 .
with respect to the correctness of information in this document. Copyright by AUDI AG.
Heating, Air Conditioner - Edition 06.2000
5 .
Audi A3 1997 ➤
141
4.2 - Sanden compressor