1 Oil drain plug
◆ O-ring seal:
"Sanden" compressor 8.8 mm; 1.5 mm (colour: black)
"Zexel" compressor 7.8 mm; 1.9 mm
◆ Tightening torque:
"Sanden" compressor
15 Nm
"Zexel" compressor
10 Nm
Notes:
◆ To drain refrigerant oil:
-
Remove compressor.
-
Remove oil drain plug.
-
Crank compressor via the magnetic clutch disc to accelerate extraction of oil.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Heating, Air Conditioner - Edition 06.2000
Audi A3 1997 ➤
9.1 - Repairing refrigerant circuit
193