Offline Mode - Stratasys Objet260 User Manual

Objet260 User Guide
3. Enter the computer name or its IP address, or click Browse to find and
4. Click OK.
If you can see the material levels in the "Job Manager Screen" (see Figure
5-101 on page 5-81), Objet Studio is connected to the printer.
Note: A printer can be listed by its name or by its computer's I P address.
Offline Mode
You can use Objet Studio to prepare trays for printing in offline mode, on a
remote computer or when the printer connection is not available. You also use
offline mode to prepare trays for printing with other printers. In this case, if
Objet Studio is currently connected to a printer, you must change to offline
mode by removing this connection.
DOC-37004 Rev. J
select it.
Figure 5-103 Connecting to a printer (B)
When the connection is established, Objet Studio is configured to prepare
print jobs for that printer.
5 Using Objet Studio
5-84