Table of Contents
Advertisement
Trusted TMR 24Vdc Digital Output Module – 40 Channel
3. Application
3.1. Module Configuration
There is no configuration required to the physical Output Module. All configurable
characteristics of the Module are performed using tools on the Engineering Workstation
(EWS) and become part of the application or System.INI file that is loaded into the TMR
Processor. The TMR Processor automatically configures the Output Module after
applications are downloaded and during Active/Standby changeover.
The IEC 61131 TOOLSET provides the main interface to configure the Output Module.
Details of the configuration tools and configuration sequence are provided in Trusted
Toolset Suite, publication
to configure the Output Module. These are:
1. Define the necessary I/O variables for the field output data and Module status data
using the Dictionary Editor of the IEC 61131 TOOLSET.
2. Create an I/O Module definition in the I/O Connection Editor for each I/O Module.
The I/O Module definition defines physical information, e.g. Chassis and Slot
location, and allows variables to be connected to the I/O channels of the Module.
3. Using the Trusted System Configuration Manager, define custom LED indicator
modes, per-channel default or fail safe states, and other Module settings.
3.2. T8451 Complex Equipment Definition
The T8451 I/O Complex Equipment Definition includes 8 I/O boards, referenced numerically
by Rack number:
Rack
I/O Board
1
DO
2
STATE
3
AI
4
CI
5
LINE_FLT
Rockwell Automation Publication ICSTT-RM280N-EN-P
ICSTT-RM249
(PD-T8082). There are three procedures necessary
Description
OEM Parameters
Field Output Status
Field Output State
Output voltage
Output current
Line Fault Status
Data Type
Direction
-
-
Boolean
Out
Integer
In
Integer
In
Integer
In
Boolean
In
Issue 14
3. Application
No. of
Channels
-
40
40
40
40
40
15
Advertisement
Table of Contents
