Sending The Sender Name (Tti) - Develop ineo 25e Manual

5
5.3.3

Sending the sender name (TTI)

You can select from three types of sender names registered in advance. You can also transmit without adding
a sender name.
For details on registering the sender names, see page 8-27.
1
Press [Fax] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Fax Ready" screen is dis-
played.
2
Press [Advanced].
3
Press [TTI].
4
Select [ON].
% Select [OFF] to deselect the setting.
5
Select the sender name, and press [Enter].
6
Press [Close].
7
Specify the destinations, then press <Start>.
% For details on specifying the destinations, see page 6-3.
5-16
Transmission related settings 5.3
ineo 25e