Broadcast - Develop ineo 25e Manual

3.2 Advanced scan functions
3.2.8

Broadcast

You can transmit to multiple destinations with a single operation. You do not need to scan the document re-
peatedly for each individual destination.
d
USB memory cannot be included into the broadcast destinations.
If you want to specify destinations using address book or shortcuts, set the "Broadcast" setting to ON in ad-
vance. Specifying destinations using other than the address book or shortcuts, the "Broadcast" setting will
be turned ON automatically when you specify multiple destinations.
The number of destinations that can be transmitted to for a single broadcast is indicated below.
Destinations
Address book destinations and groups
Manually entered e-mail addresses
Shared folders
FTP servers
Using other than the address book or shortcuts
1
Press [Scan] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Scan Ready" screen is
displayed.
2
Specify the destination.
% For details on specifying the destinations, see the following pages:
% To specify an e-mail, see page 6-3.
% To specify a folder, see page 2-7.
% To specify a FTP, see page 2-9.
3
Repeat step 2 to specify all the destinations.
% You can confirm or delete the specified destinations. For details, see page 6-14.
ineo 25e
Number
1,000
30
300
20
3
3-15