Stamp (Option) - Develop ineo 25e Manual

3
4
Select the scan size, and press [Enter].
5
Press [Close].
6
Specify the destinations, and press <Start>.
% For details on the procedure, see page 2-3.
3.2.5

Stamp (Option)

You can stamp on a document that has been scanned using the automatic document feeder and check it has
been scanned.
d
The stamp function is optional.
This setting is only available with the automatic document feeder.
1
Press [Scan] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Scan Ready" screen is
displayed.
2
Press [Advanced].
3
Select [Stamp].
4
Select [ON], and press [Enter].
% Select [OFF] to deselect the setting.
5
Press [Close].
6
Specify the destinations, and press <Start>.
% For details on the procedure, see page 2-3.
3-10
Advanced scan functions 3.2
ineo 25e