Develop ineo 25e Manual page 192

9
Scan to folder, Scan to priner, and DocIndex communication errors
Error code
9999
1001, 1003,
1008, 1013,
1016, 1017,
1032, 1033,
1080, 1087,
1123, 1230,
1231, 1232,
1233, 1234,
2001
1002, 1004,
1006, 3019,
3021, 3022,
3023, 3024,
3026, 3027,
3031, 3034,
3035, 3039
1005, 1012,
2002, 2004,
2006, 2007,
2049, 2050,
2051, 2052,
2065, 2067,
2069, 2088,
2089, 2090
1018
Scan to FTP and DocIndex communication errors
Error code
9000, 9999
17, 33, 56,
210, 211,
212, 213,
214, 219
10, 217,
218, 221
7, 220, 222
9-6
Error message
System error occurred.
Cannot connect.
Cannot read or write to the file.
Not able to log in.
Not a shared folder.
Error message
System error occurred.
Cannot connect.
Cannot read or write to the file.
Not able to log in.
Error messages
Countermeasure
An error occurred because the system memo-
ry was temporarily insufficient. Wait a while,
and perform the operation again.
Check whether there is a computer with the
same name as the host name of the machine
on the network.
In the TCP/IP settings, check whether the DNS
server address, DNS suffix, and WINS server
address are set correctly.
Check whether the destination computer
name is registered in the DNS server.
Check whether WINS is set correctly in the
destination computer.
Check whether the shared folder on the desti-
nation computer has writing prohibited.
Check whether the user name and password
for logging in to the shared folder specified as
the destination are entered correctly.
If you are using Windows 2003, enter the name
and password of a user with write privileges for
logging in.
Check whether the file specified as the file to
attach exists.
Countermeasure
An error occurred because the system memo-
ry was temporarily insufficient. Wait a while,
and perform the operation again.
In the TCP/IP settings, check whether the DNS
server address is set correctly.
Check whether the destination FTP server is
registered in the DNS server.
Check whether the destination FTP server has
writing prohibited.
Check whether the user name and password
for logging in to the FTP server specified as the
destination are entered correctly.
9.1
ineo 25e