Specifying Default Settings; Specifying Default Scanner Settings - Develop ineo 25e Manual

8
8.3

Specifying default settings

The default values are those used when you press <Reset> to return to the ready screen. The machine returns
to the default settings if it is left without any operation for a designated period of time. Changing the default
values of often-used functions can shorten the time required to adjust settings.
d
You can set the time it takes to return to the default settings. For details, see chapter 2 in the Administrator's
Guide.
8.3.1

Specifying default scanner settings

Setting procedures
1
Press [Setting] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP menu screen is
displayed.
2
Press [Default Setting].
3
Press [Scanner Settings].
4
Press [Default Settings].
5
Select the function to set, and press [Enter].
% For details, see page 8-31.
6
Select the default value, and press [Enter].
7
Press [Close].
8-30

Specifying default settings

8.3
ineo 25e