Develop ineo 25e Manual page 17

2.1 Basic scanning
Scanning to a shared PC folder by directly specifying the folder
1
Load the document.
2
Press [Scan] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Scan Ready" screen is
displayed.
3
Set the resolution and document type, as necessary.
% For details, see page 2-17 and page 2-18.
4
Press [PC/USB], and then [Folder].
5
Press [Browse].
% The list of computers or networks is displayed.
6
Specify the shared folder to save the data, and press [Enter].
% The specified folder will be highlighted.
% Press [Root] to return to the list of computers or networks.
% Press [Back] to return to the previous screen.
Press [Cancel] to close the screen.
7
Enter the user name to access the folder, and press [Enter].
% When no authentication is required or the to access the folder, proceed to step 9.
8
Enter the password to access the folder, and press [Enter].
9
Press <Start>.
% When you have loaded the document on the automatic document feeder, this will conclude the op-
eration.
% When you have loaded the document on the document glass, the following message will appear
when the first page of the document is scanned.
10
Load the next document, and press [Next Doc].
% To finish scanning, press [Complete].
11
Repeat step 10 to scan all the documents.
% To finish scanning, press [Complete].
ineo 25e
2
2-7