Develop ineo 25e Manual page 180

8
List of default transmission settings
Function
Resolution
Contrast
Scan Size
*1
Stamp
Next Doc.
TTI
Cover Page
Tx Report
Memory Tx
*1 Stamp function is optional.
d
Highlighted values are the default settings specified at the time of shipment.
List of other default settings
Function
Redial Attempts
Redial Interval
Number of Rings
8-36
Description
This sets the default resolution when a document is scanned.
This sets the default contrast when a document is scanned.
Set the default scan size setting.
You can stamp on a document that has been scanned (or
transmitted) using the automatic document feeder and check
it has been scanned (or transmitted).
You can scan a series of separate documents and transmit
them as a single document.
ADF stands for automatic document feeder.
FBS stands for document glass (Flat Bed Scanner).
The sender name printed at the top of a document received
at the destination.
A cover page containing a simple message can be attached
to the documents.
The transmission result is printed. Or can be checked via e-
mail.
This sets whether to give the priority to memory transmission
or to real-time transmissions when sending faxes.
Description
This sets the number of redials when the other machine can-
not be connected to, for example, when the other line is busy.
Set the redial interval in "Redial Interval".
This sets the redial interval.
This sets the number of times the machine rings until fax re-
ception starts when the reception mode is set to Fax. The
number of rings becomes more than the set number when
the machine is in the sleep mode.
Specifying default settings
Settings
Normal
Fine
Super Fine
Photo
Background
Lightest
Lighter
Normal
Darker
Darkest
A4 , F4, A5
Letter, Legal,
H.LTR ,
OFF
ON
ADF: OFF
ON
FBS: OFF
ON
OFF
ON
OFF
ON
Doc.1
Doc.2
Doc.3
OFF
Print
e-mail
OFF
ON
Settings
0 - 14 time(s):
2 time(s)
0 - 5 Minutes :
1 Minute
0 - 10 time(s):
2 time(s)
8.3
ineo 25e