Delayed Transmission (Delayed Tx) - Develop ineo 25e Manual

5.3 Transmission related settings
5.3.2

Delayed transmission (Delayed Tx)

You can use this function to specify the date and time to send the fax.
- You can specify a time and date up to a month ahead. The document for delayed transmission is stored
in memory until the specified time, at which point transmission will start.
- If real time transmission is specified, the document will remain loaded until the specified time, so you
will not be able to copy, scan, or transmit other faxes.
- This function can be also specified in combination with other functions (such as broadcasting, etc.).
1
Press [Fax] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Fax Ready" screen is dis-
played.
2
Press [Advanced].
3
Press [Delayed Tx].
4
Select [ON].
% Select [OFF] to deselect the setting.
5
Enter the transmission date and time, and press [Enter].
% Enter the time in 24 hour format.
% You can use [
6
Press [Close].
7
Specify the destinations, then press <Start>.
% For details on specifying the destinations, see page 6-3.
d
After scanning the document, you can check or delete the reserved transmission by pressing <Job Confirm.
) Fax Cancel> (page 4-12).
To change the specified time after scheduling the transmission, you need to delete the delayed transmission
and then set transmission date again.
ineo 25e
* ) + ,
], [ ], [ ], [ ], and numeric keys.
5
5-15