Confirmation Dial - Develop ineo 25e Manual

5
5.4.5

Confirmation dial

When the confirmation dial function is set, a screen requiring you to reenter the destination will be displayed
at transmission. Transmission is allowed only when the first and second enter match. Entering the destination
twice enables you to check whether there has been a mistake when entering the number.
There are two types of confirmation settings:
- Confirm Speed-Dial
This will allow you to prevent sending faxes to undesired destinations by mistake, by reentering the destina-
tions that are entered using the speed-dial number and one-touch keys.
- Confirm Numeric keys
This will allow you to prevent sending faxes to undesired destinations by mistake, by reentering the fax num-
bers. When the destination includes a dialing option like pause (/P), you need to re-enter it exactly as entered
previously including the dialing option.
d
When using manual transmission (page 4-4), the confirmation dial function is disabled, even if you set it to
ON.
1
Press [Setting] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP menu screen is
displayed.
2
Press [Management].
% If an administrator password is set, enter the password and press [Enter].
3
Press [Security Communication].
4
Select [Confirm Speed-Dial] or [Confirm Numeric keys] you
want to set.
5
Select [ON] to perform the confirm dial function, and press [Enter].
% Select [OFF] to deselect the setting.
6
Press [Close].
5-24
Security fax functions
ineo 25e
5.4