File Format - Develop ineo 25e Manual

3.2 Advanced scan functions
3.2.10

File format

You can select the file format for sending.
Available File Formats
- For monochrome scanning: TIFF, PDF, or PDF w/Password (encrypted PDF)
- For color scanning: JPEG, PDF, or PDF w/Password (encrypted PDF)
Encrypted PDF Settings
When you have selected PDF w/Password (encrypted PDF) for the file format, you can also specify the fol-
lowing settings.
Item
Encryption Level
Printing Allowed
Editing Allowed
Copying Allowed
Open Password
Permissions Password
*1 The encryption levels in order of strength are Low (40-bit RC4), High (128-bit RC4), and High (128-bit
AES).40-bit RC4 is supported by Acrobat 4.0 (PDF 1.3) or later, 128-bit RC4 is supported by Acrobat 6.0
(PDF 1.5) or later, and 128-bit AES is supported by Acrobat 7.0 (PDF 1.6) or later.
1
Press [Scan] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Scan Ready" screen is
displayed.
2
Press [Advanced].
3
Press [File Format].
ineo 25e
Description
*1
Select Low (40-bit RC4), High (128-bit RC4), or High (128-bit AES).
Select whether to allow the file to be printed.
Select whether to allow the file to be edited.
Select whether to allow the file to be copied.
If you set this password, the password must be entered when opening the
created PDF file.
Up to 28 alphanumeric characters and symbols can be entered for the
password.
Set the password after pressing <Start>.
If you set this password, the password must be entered when printing or ed-
iting the created PDF file. The operations for which the password is required
can be set in Printing Allowed, Editing Allowed, and Copying Allowed.
Up to 28 alphanumeric characters and symbols can be entered for the pass-
word.
Set the password after pressing <Start>.
3
3-17