Develop ineo 25e Manual page 101

5.4 Security fax functions
Setting the closed reception
1
Press [Setting] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP menu screen is
displayed.
2
Press [Management].
% If an administrator password is set, enter the password and press [Enter].
3
Press [Security Communication].
4
Press [Closed Reception].
5
Select [ON] to perform closed reception, and press [Enter].
% Select [OFF] to deselect the setting.
6
Press [Close].
d
If a passcode is set, faxes can only be received from the same model that also have a security function and
have the same passcode registered. For the passcode setting, see page 5-20.
For details on the communication range using closed communication and passcodes, see page 5-21.
ineo 25e
5
5-19