Security Reception - Develop ineo 25e Manual

5
5.4.7

Security reception

This allows documents received after the security reception start time to be stored in memory without being
printed.
To print the documents stored in memory, you need to enter the protect passcode.
d
To set security reception, it is necessary to set a protect passcode in advance. For details, see chapter 3 in
the Administrator's Guide.
When the protect passcode is deleted, this function will be turned off.
When security reception is set, it will start at the preset start time every day.
When documents have been received during security reception, the message "Security Reception document
exists" is displayed.
Even if it is not the start time, you can set this function ON from the advanced settings.
Setting security reception
1
Press [Setting] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP menu screen is
displayed.
2
Press [Management].
% If an administrator password is set, enter the password and press [Enter].
3
Press [Security Communication].
4
Press [Secure Reception].
5
Enter the protect passcode, and press [Enter].
6
Press [ON] to perform the security reception.
% Press [OFF] to deselect the setting. Proceed to step 8.
7
Set the security reception starting time, and press [Enter].
% Enter the time in 24 hour format.
% You can use [
8
Press [Close].
5-26
* ) + ,
], [ ], [ ], [ ], and numeric keys.
Security fax functions
ineo 25e
5.4