3
Using the address book or shortcuts
1
Press [Scan] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Scan Ready" screen is
displayed.
2
Press [Advanced].
3
Press [Broadcast].
4
Select [ON], and press [Enter].
% Select [OFF] to deselect the setting.
5
Specify the destinations using the address book or shortcuts.
6
Repeat step 5 to specify all the destinations.
% You can confirm or delete the specified destinations. For details, see page 6-14.
3.2.9
Batch scan
When this function is on, it means that all scanned pages will be saved as one file. If you turn this function
off, each scanned page will be saved as an individual file.
1
Press [Scan] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Scan Ready" screen is
displayed.
2
Press [Advanced].
3
Press [Batch Scan].
4
Select [OFF], and press [Enter].
% If you select [ON], the batch scan setting is enabled.
5
Press [Close].
6
Specify the destinations, and press <Start>.
% For details on the procedure, see page 2-3.
3-16
Advanced scan functions
3.2
ineo 25e
Need help?
Do you have a question about the ineo 25e and is the answer not in the manual?