Develop ineo 25e Manual page 171

8.2 Initial setup (User Install)
Setting the fax reception mode
Select the reception mode that best matches the machine usage.
1
Open the user install screen (page 8-25).
2
Press [Fax Reception Mode].
3
Select the reception mode, and press [Enter].
Setting the dial tone detection
Select ON if you want to set the dial tone detection. When you set to ON, you cannot transmit the faxes
through a line that cannot acquire a dial tone. Normally, select OFF.
1
Open the user install screen (page 8-25).
2
Press [Dial Tone Detect].
3
Select [ON] or [OFF], and press [Enter].
Registering your name or company name (TTI)
You can register three TTI's (Transmit Terminal Identifier).
1
Open the user install screen (page 8-25).
2
Press [TTI Enter/Edit].
3
Press [TTI 1].
4
Enter the sender name (your name or company name), and press [Enter].
% You can enter up to 22 characters for the sender name.
% For details on entering the characters, see chapter 2 in the Administrator's Guide.
5
To register TTI 2 and TTI 3, select [TTI 2] or [TTI 3] in step 3, and repeat step 4.
ineo 25e
8
8-27