Develop ineo 25e Manual page 114

5
Deleting distributing conditions
1
Press [Setting] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP menu screen is
displayed.
2
Press [Register].
3
Press [Auto Distribute].
4
Select the distributing condition you want to delete, and press [Delete].
5
When you prompted, press [Yes].
% Press [No] to close the screen without deleting.
Setting auto distribution
If auto distribution is enabled, the forwarding conditions set individually are enabled and faxes will be distrib-
uted according to the registered conditions.
1
Press [Fax] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Fax Ready" screen is dis-
played.
2
Press [Advanced].
3
Press [AutoDist.].
4
Select [ON] to enable auto distribution or [OFF] to disable, and press [Enter].
5-32
Useful reception function 5.5
ineo 25e