Develop ineo 25e Manual page 50

3
6
If you want to edit subject, press [Subject].
% Otherwise, go to step 8.
7
Enter the subject, and press [Enter].
% Up to 80 characters can be entered for the subject.
% For details on entering the characters, see chapter 2 in the Administrator's Guide.
8
If you want to edit mail text, press [Mail Text].
% Otherwise, go to step 10.
9
Enter the mail text, and press [Enter].
% Up to 1,024 characters can be entered for the message.
% For details on entering the characters, see chapter 2 in the Administrator's Guide.
% Press
% Press [ViewText] to confirm the mail text that has been entered. After confirming, press [Edit] to re-
turn to the entry screen.
10
Press [Enter].
11
Press [Close].
12
Specify the destinations, and press <Start>.
% For details on the procedure, see page 2-3.
3-20
to enter a line break. A line break takes up two characters.
Advanced scan functions 3.2
ineo 25e