Develop ineo 25e Manual page 134

7
7
If you selected "e-mail", specify the destination for transmission report, and press [Enter].
% Up to 50 characters can be entered.
% To delete one of the entered characters, press [Delete].
8
Press [Close] repeatedly until the "Fax Ready" screen is displayed.
9
Specify the destinations, and press <Start>.
% For details on specifying the destinations, see page 6-3.
d
You can change the transmission report settings while scanning.
Press [Tx Report] on the screen displayed while scanning. Continue
the procedure from step 5.
7-4
Checking the transmission report 7.1
ineo 25e