Security Fax Functions; Closed Communications - Develop ineo 25e Manual

5
5.4

Security fax functions

5.4.1

Closed communications

When closed communication is set, fax messages are transmitted and received between the same model
only (excluding some models).
Closed communication can be set separately for transmission and reception.
Setting the closed transmission
1
Press [Setting] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP menu screen is
displayed.
2
Press [Management].
% If an administrator password is set, enter the password and press [Enter].
3
Press [Security Communication].
4
Press [Closed Transmission].
5
Select [ON] to perform closed transmission, and press [Enter].
% Select [OFF] to deselect the setting.
6
Press [Close].
d
If a passcode is set, faxes can only be transmitted to the same model that also have a security function and
have the same passcode registered. For the passcode setting, see page 5-20.
For details on the communication range using closed communication and passcode, see page 5-21.
When using manual transmission (page 4-4), the closed transmission function is disabled, even if you set it
to ON.
Even if this setting is ON, you can set the closed transmission OFF only for one transmission when you set
the setting off from the advanced settings.
5-18

Security fax functions

ineo 25e
5.4