File Name - Develop ineo 25e Manual

3.2 Advanced scan functions
3.2.3

File name

You can edit the file name for the scanned image data. You can also enter the file name using a file name
registered in advance.
d
If you do not edit the file name, the current year, month, day, and time are automatically used as the file name
when the data is transmitted or saved.
For example, the file name for a TIFF file created at 13:30:50 on the 15th of Jan., 2012 will be
"20120115133050.tif".
You can register file names in advance. For details on registering the file names, see page 8-40.
You can edit the file name for the currently scanning document, but not save it on the machine to use it later.
Entering a file name
1
Press [Scan] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Scan Ready" screen is
displayed.
2
Press [File Name].
% If [File Name] is not displayed, press [Advanced] and then
[File Name].
3
Enter the file name, and press [Enter].
% Up to 80 characters can be entered for the file name.
% For details on entering the characters, see chapter 2 in the Administrator's Guide.
% To check the entered text, press [File Name] and then [ViewText]. To close the screen, press [Edit].
4
Specify the destinations, and press <Start>.
% For details on the procedure, see page 2-3.
ineo 25e
3
3-7