Develop ineo 25e Manual page 30

2
5
Select the setting.
Item
Resolution
Pixel type
Document type
Contrast
Document size
Size
Fixed image size
Duplex
[Default]
[Scan]
[Select MFP]
[Save]
[Exit]
[Extended Functions]
tab
[Information] tab
6
Click [Extended Functions] tab, and enter the setting if necessary.
Item
User Authentication
User ID
Password
[Default]
[Scan]
[Select MFP]
[Save]
[Exit]
[Realtime Scan] tab
[Information] tab
7
Click [Scan].
2-20
Description
This setting may be required, depending on the application software. Set
it as required.
(Normally it is not necessary to change this setting from its default value.)
Select to scan in color, B/W (black and white) or grayscale.
Select the document type.
Select the contrast.
The default scan size of the machine is displayed.
Select the document size.
This setting may be required, depending on the application software. Set
it as required.
(Normally it is not necessary to change this setting from its default value.)
When you want to scan both sides of a document, select the binding po-
sition of the document. For details, see (page 3-14).
Click to return the settings to the factory defaults.
Click to start scanning.
Click to change the scanner or when the IP address of the machine has
changed, etc.
This is for network scanning only.
Click to save the current settings.
This cannot be clicked unless the settings have been changed.
Click to close the screen.
See the next step.
Displays the version information for the scanner driver.
Description
To use the machine as an authenticated user, enter the user ID and pass-
word.
Enter the user ID.
Enter the password if necessary.
Click to returns the settings to the factory defaults.
Click to start scanning.
Click to change the scanner or when the IP address of the machine has
changed, etc.
This is for network scanning only.
Click to save the current settings.
This cannot be clicked unless the settings have been changed.
Click to close the screen.
See the former step.
Displays the version information for the scanner driver.
Scanning with a TWAIN driver 2.3
ineo 25e