Scan Size; Next Document Setting (Next Doc.) - Develop ineo 25e Manual

5
Cover page
A cover page containing a simple message can be automatically attached to the documents. You can either
enter a subject and message or use a template registered in advance to insert the cover page document. See
page 5-12.
Transmission confirmation report (Tx Report)
For details, see page 7-3.

Scan size

You can transmit an image scanned using a scan size set in advance. This is useful when you want to scan
a part of the document or want to specify the document size. See page 5-6.
Stamp (Option)
You can stamp on a document that has been scanned (or transmitted) using the automatic document feeder
and check it has been scanned (or transmitted). For details, see page 5-11.

Next document setting (Next Doc.)

If you need to transmit a large volume of documents that cannot all fit into the automatic document feeder at
once, turn "Next Doc" on to divide scanning. You can scan both through the automatic document feeder and
on the document glass (page 5-8).
Closed transmission (Closed Tx)
When closed transmission is set, fax messages cannot be transmitted to machines other than this product.
If a passcode is set, faxes can only be transmitted to machines that are the same product that have the same
passcode registered (page 5-18).
ID check transmission (ID Check)
ID check transmission limits fax transmission to when the lower four digits of the fax number you dialed and
those registered in the destination machine match (page 5-22).
Memory transmission (Memory Tx)
For details, see page 4-10.
Dialing options (Dialing Opt.)
For details, see page 4-9.
Broadcast transmission (Broadcast)
This function enables you to transmit the same fax to many destinations in one operation, thereby eliminating
the need to scan and transmit the fax to each individual destination.
For details, see page 4-6.
Delayed transmission (Delayed Tx)
You can use this function to specify the date and time to perform transmission. See page 5-15.
E-mail gateway (E Gateway)
You can transmit to a fax server as if you were transmitting to a regular telephone line. For details, see
page 5-17.
Location
You can check or delete the specified destinations at transmission. See page 6-15.
5-4
Introduction to advanced functions 5.1
ineo 25e