Develop ineo 25e Manual page 64

4
Setting the contrast
You can set the contrast to scan with according to the document.
Item
Lightest:
Lighter:
Normal:
Darker:
Darkest:
1
Load the document.
2
Press [Fax] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Fax Ready" screen is dis-
played.
3
Press [Contrast].
If [Contrast] is not displayed, press [Advanced] and then [Contrast].
4
Select the desired contrast, and press [Enter].
5
Specify the destinations, and press <Start>.
% For details on specifying the destinations, see page 6-3.
% If you loaded the document in the automatic document feeder, this concludes the procedure.
% If you loaded the document on the document glass, the message "Set next document." is displayed
when the loaded documents have been scanned. Load the next document, and press [Next Doc].
Press [Tx Start] to start transmission.
4-8
Description
Select to scan with the lightest contrast.
Select to scan with a contrast between the normal contrast and the lightest contrast.
Select to scan with the normal contrast.
Select to scan with a contrast between the normal contrast and the darkest contrast.
Select to scan with the darkest contrast.
Basic faxing
Normal
Lighter Darker
Lightest Darkest
ineo 25e
4.1