Develop ineo 25e Manual page 91

5.2 Scanner related settings
6
Specify the destinations, and press <Start>.
% For details on specifying the destinations, see page 6-3.
% If you loaded the document in the automatic document feeder, this concludes the procedure.
% When the loaded documents have been scanned, the message "Set next document." is displayed.
7
Load the next document, and press [Next Doc.].
8
Repeat step 7 to scan all the documents.
9
When you have finished scanning all the documents, press [Tx Start].
ineo 25e
5
5-9