Develop ineo 25e Manual page 166

8
Specifying the network settings
The following items are set when installing the Scan to Print Monitor, but can be changed as necessary.
Item
IP Address
HTTP Port No.
HTTPS Port No.
Perform secure communica-
tions (L)
1
Right-click the task tray icon of the Scan to Print Monitor, and select "Configuration".
2
Select the [Network Settings] tab.
3
To change the IP address of the machine, enter the IP address.
% Click [Search] to automatically search for copiers on the network and select the MFP to use. Select
the IP address of this machine from the search results, and click [OK].
4
Edit the HTTPS port and HTTP port numbers.
% To edit the HTTP port number, deselect "Perform secure communications" first.
% To edit the HTTPS port number, select "Perform secure communications" first.
5
Click [OK].
8-22
Description
Set the IP address of the machine.
This setting is enabled when "Perform secure communications" is de-
selected.
Set the HTTP port number set in Message Board.
This is normally set to "80".
This setting is enabled when "Perform secure communications" is se-
lected.
Set the HTTPS port number set in Message Board.
This is normally set to "443".
Select this to perform SSL communications.
Registering destinations 8.1
ineo 25e