Develop ineo 25e Manual page 172

8
Selecting the default TTI
Select the TTI that will be used most often.
1
Open the user install screen (page 8-25).
2
Press [Default TTI].
3
Select the TTI, and press [Enter].
Entering your fax number
1
Open the user install screen (page 8-25).
2
Press [TTI Number].
3
Use the numeric key to enter the TTI number, and press [En-
ter].
% TTI number can contain up to 20 characters.
% To enter "+" symbol before your country code, press [+].
To make long numbers easier to read, press [–] to enter it.
% To erase a number, press [Clear].
% To change just one number, move the cursor using [
)
[ ] then press [Clear] to erase the number. Then re-enter
the correct number.
8-28
Initial setup (User Install)
*
] or
8.2
ineo 25e