Develop ineo 25e Manual page 38

3
Using a registered file name
1
Press [Scan] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Scan Ready" screen is
displayed.
2
Press [File Name].
% If [File Name] is not displayed, press [Advanced] and then [File Name].
3
Press [File Name].
4
Press [File Name].
5
Select the file name you want to use.
6
Edit the file name as necessary, and press [Enter].
% Up to 80 characters can be entered for the file name.
% For details on entering the characters, see chapter 2 in the Administrator's Guide.
% To check the entered text, press [File Name] and then [ViewText]. To close the screen, press [Edit].
7
Specify the destinations, and press <Start>.
% For details on the procedure, see page 2-3.
3-8
Advanced scan functions 3.2
ineo 25e