Scanning To Usb Memory Device - Develop ineo 25e Manual

2.1 Basic scanning
2.1.4

Scanning to USB memory device

You can save a scanned document to a USB memory connected to the machine.
d
Only USB memory with no security function can be used.
The scanned data are save on the root of the USB memory.
Memory card readers connected via USB, USB memory via an extension cable and USB hub, and USB mem-
ory that does not meet the USB standards, are all unsupported.
If the USB memory becomes full while the data is being saved, the data that is being written is all deleted.
Therefore, make sure that the USB memory has enough free space in advance.
1
Load the document.
2
Press [Scan] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode>
repeatedly until "Scan Ready" screen is displayed.
3
Set the resolution and document type, as necessary.
% For details, see page 2-17 and page 2-18.
4
Press [PC/USB], and then [USB].
ineo 25e
USB memory
2
2-11