Develop ineo 25e Manual page 24

2
5
Press [Apps], and then [EVERNOTE].
6
Select the destination, and press [Enter].
% The addresses on LDAP server have
name. Press
Press [Close] to close the confirmation screen.
You can select multiple destinations.
7
Confirm the destinations, and press [Enter].
% To delete a selected destination, select the destination to delete, and press [Delete].
% You can change the destination from "To" to "Cc" or "Bcc". Press [To] to switch to a "To", "Cc", or
"Bcc" destination.
% Press [Sort] to sort the destinations in order of "To", "Cc", or "Bcc".
8
Press <Start>.
% When you have loaded the document on the automatic document feeder, this will conclude the op-
eration.
% When you have loaded the document on the document glass, the following message will appear
when the first page of the document is scanned.
9
Load the next document, and press [Next Doc].
10
Repeat step 9 to scan all the documents.
% To finish scanning, press [Complete].
2-14
on the left of their
to check the details for that destination.
Basic scanning 2.1
ineo 25e