Scan Size - Develop ineo 25e Manual

3.2 Advanced scan functions
3.2.4

Scan size

You can transmit or save an image scanned using a scan size set in advance. This is useful when you want
to scan a part of the document or to specify the document size.
d
When you scan using the document glass, only an area from the reference setting position equal to the set
scan size is scanned.
When you scan using the automatic document feeder, only an area from the center with a width equal to the
set scan size is scanned. The whole length of the document is scanned.
Reference setting position
A5‰
Reference setting position
Half- letter ‰ Letter
1
Press [Scan] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Scan Ready" screen is
displayed.
2
Press [Advanced].
3
Press [Scan Size].
% If you loaded the document in the automatic document
feeder, "Auto" is selected.
ineo 25e
Document glass
A4 F4
Legal
Automatic document feeder
Reference
setting
position
A: A4 / A5 ‰ / F4
Reference
setting
position
A: Legal / Letter / Half-letter ‰
3
3-9