Duplex Scan - Develop ineo 25e Manual

5
5.2.3

Duplex scan

You can transmit both sides of a document.
d
This setting is only available with the automatic document feeder.
1
Press [Fax] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Fax Ready" screen is dis-
played.
2
Press [Advanced].
3
Select [DuplexScan].
4
Select [Long Edge] or [Short Edge], and press [Enter].
% Refer to the display and set the document in the right di-
rection.
% To confirm the binding type of your document, see
(page 3-14).
Select [OFF] to deselect the setting.
5
Press [Close].
6
Specify the destinations, and press <Start>.
% For details on specifying the destinations, see page 6-3.
5-10
Scanner related settings 5.2
ineo 25e