Redialing - Develop ineo 25e Manual

4.1 Basic faxing
4.1.3

Redialing

"Redialing" refers to the process of transmitting to a previous destination again.
The machine supports the following two types of redialing:
- Manual redialing
- Automatic redialing
Manual redialing
The machine memorizes the latest 10 destinations transmitted using the numeric keys on the control panel.
You can recall the memorized numbers to transmit a fax again. For details, see page 6-12.
Automatic redialing
When transmission was not successful during automatic transmission because the line was busy, the number
is automatically redialed at regular interval.
If the transmission was not successful even after the set number of redials, the document stored in the mem-
ory will be deleted and an error message will be printed.
d
You cannot use manual redialing or automatic redialing when performing manual transmission.
Redialing cannot be performed with real time transmission (page 4-10).
The automatic redialing frequency and interval can be set from 0 to 14 times and 0 to 5 minutes, respectively.
For details, see page 8-36.
For details on canceling the transmission waiting for redialing, see page 4-12.
ineo 25e
4
4-5