Develop ineo 25e Manual page 125

6.1 Specifying destinations
Entering e-mail addresses
When transmitting with scan to e-mail, enter the e-mail address.
1
Press [Scan] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Scan Ready" screen is
displayed.
2
Press [Advanced].
3
Press [Mail Address].
4
Enter the e-mail address, and press [Enter].
% Up to 50 characters can be entered.
% For details on entering the characters, see chapter 2 in the Administrator's Guide.
5
When there are multiple destinations, repeat the procedures from step 3.
d
When you press [Register] after entering an e-mail address, you can register the displayed e-mail address in
the address book. For details, see page 8-7.
ineo 25e
6
6-11