Initial Setup (User Install) - Develop ineo 25e Manual

8
8.2

Initial setup (User Install)

In some countries you are required by law to indicate the sender name and fax number on every fax you send.
YOU MUST THEREFORE STORE THE SENDER NAME AND FAX NUMBER IN YOUR MACHINE BEFORE
USING IT.
Every fax page you send arrives at the receiving machine with a single line of text at the very top of the page.
This text lists a sender name, called the Transmit Terminal Identifier (TTI), and a fax number.
Under "User install", you can setup the following items including your name and fax number. These settings
can be changed at any time.
Language
Select the language to use.
Current date and time
Set the correct date and time. This setting is applied to all fax operations, such as the delayed transmission
and communication management options.
Automatic daylight saving time detection
Adjust the clock automatically in the summer time period.
Broadcasting
Set the broadcast transmission option.
Fax reception mode
Select the desired reception mode from the Fax mode or Tel mode options.
For details on the reception modes, see page 4-15.
Dial tone detection
Set the dial tone detection.
Sender name (TTI) registration
This makes it easy to show the sender's name to the receiving party, to print the name on the document re-
ceived by the receiving party, and for the receiving party to know where the document came from. Up to 22
characters can be entered, and three names can be registered.
Default TTI
The most commonly-used TTI among three possible registered TTIs can be designated as the default TTI.
Your fax number
The fax number of this machine can be told to the receiving party, or printed on the document received. Up
to 20 digits can be entered.
Time zone
A time zone is a region that adopts the same time differences as the ones from the Royal Observatory, Green-
wich, England (from– 12 hours to + 13 hours), usually regarded as standard time around the world.
8-24

Initial setup (User Install)

8.2
ineo 25e