Registering A Passcode - Develop ineo 25e Manual

5
5.4.2

Registering a passcode

Registering a passcode

You can set the passcode required for closed transmission and closed reception.
You can use closed transmission and reception without setting a passcode; however, setting a passcode is
recommended to strengthen the security function.
d
If a passcode is set, faxes can only be transmitted to or received from the same model that also have a se-
curity function and have the same passcode registered.
For details about the closed communication and the communication range specified by a passcode, see
page 5-21.
1
Press [Setting] on My MFP Menu screen.
% If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP menu screen is
displayed.
2
Press [Management].
% If an administrator password is set, enter the password and press [Enter].
3
Press [Security Communication].
4
Press [Passcode].
5
Enter the four digit passcode using the numeric keys, and press [Enter].
% Enter a number other than "0000". If you enter "0000", the passcode setting is disabled.
6
Press [Close].
5-20
Security fax functions
ineo 25e
5.4