Scanning With A Twain Driver - Develop ineo 25e Manual

2.3

Scanning with a TWAIN driver

2.3

Scanning with a TWAIN driver

You can use a TWAIN-compliant Windows application on your computer to scan a document.
d
Install the TWAIN scanner driver to the computer before using this function.
For details on installing the driver, see chapter 2 in the Printer Guide.
To scan a document with a TWAIN driver, you should connect the machine either to a network and setup the
"TCP/IP Settings", or directly with an USB cable.
Since the operation procedure differs according to the application software you are using, refer to the docu-
mentation for the application software for details.
1
Load the document.
2
Start the application software that supports TWAIN on your computer.
3
Click [Scan] and select "BW MF25-1 NSCN".
% This command may differ according to the application you are using.
% If you have connected the computer and the machine with a USB cable, select "BW MF25-1 Scan".
Proceed to step 5.
4
Enter the IP address of the machine, and click [OK].
% This procedure is required only for the first time.
% If you do not know the IP address, you can detect the IP address of the connected devices on "De-
vice Search" screen. First, click [Search] to display the device search screen. Next, click [Refresh].
If the "Windows Security Alert" screen is displayed, click [Unblock] or [Allow access], and then click
[Refresh] again. Select the device name from the list, and click [OK]. (The "Windows Security Alert"
screen is not displayed from the second time you perform this operation.)
% Enter the HTTP port number, if necessary.
ineo 25e
2
2-19