Figure 11.4. Radiant Programmer - Device Detected; Figure 11.5. Radiant Programmer - Select Target Memory For Device Properties - Lattice Semiconductor MachXO5T-NX-Development Board User Manual

6. Open the Device Properties dialog box by double click Operation column. Select FLASH Configuration Memory
from Target Memory drop-down list in the Device Operation area, as shown in
Device Properties dialog showing FLASH Configuration Memory details
Figure 11.5. Radiant Programmer – Select Target Memory for Device Properties
© 2023 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal.
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
FPGA-EB-02058-1.0
Figure 11.4. Radiant Programmer – Device Detected
MachXO5T-NX-Development Board
Evaluation Board User Guide
Figure 11.5. You can then see the
(Figure 11.6).
29