Timeout Trigger - UNI-T MSO/UPO2000 Series Programming Manual

Programming Manual
:TRIGger:DELay:SELect
Functional description：

This command is used to switch the selected source. SOURce<n> represents source, n take value from 1,
2.
SOURce1 represents focus source; SOURce2 represents trigger source.
Return format：

Query returns { SOURce1 | SOURce2 }.
For example：

:TRIGger:DELay:SELect SOURce1
:TRIGger:DELay:SELect?

Timeout Trigger

:TRIGger:TIMEOUT:TIME
Command format：

:TRIGger:
:TRIGger:
Functional description：

This command is used to set time interval of timeout tigger.
Return format：

Query returns the current time interval, unit is s.
For example：

TIMEOUT
:TRIGger:
TIMEOUT
:TRIGger:
:TRIGger:TIMEOUT:SLOPe
Command format：

:TRIGger:TIMEOUT:SLOPe {POSitive|NEGative|ALTernation}
:TRIGger:TIMEOUT:SLOPe?
Functional description：

This command is used to set edge type of trigger souece, which includes POSitive (rising edge), NEGative
(falling edge) and ALTernation (rising/falling edge).
Return format：

Query returns edge type of trigger souece {POSitive|NEGative|ALTernation}.
For example：

:TRIGger:TIMEOUT:SLOP POS
:TRIGger:TIMEOUT:SLOP?
Instruments.uni-trend.com
TIMEOUT
:TIME <time>
TIMEOUT
:TIME?
:TIME 1
:TIME?
Set to select the foucs trigger.
Query returns SOURce1.
Set time interval of timeout tigger to 1s.
Query returns 1.000e000.
Set edge trigger to POSitive.
Query returns POSitive.
MSO/UPO2000 Series
54 / 156