UNI-T MSO/UPO2000 Series Programming Manual page 112

Programming Manual
AWG:CHANnel1:LIMit:LOWer?
AWG:CHANnel<n>:LIMit:UPPer
Command format：

AWG:CHANnel<n>:LIMit:UPPer <voltage>
AWG:CHANnel<n>:LIMit:UPPer?
Functional description：

This command is used to set the amplitude upper limit of the specified channel.
<voltage> represents voltahe, unit is assigned by the current channel.
<n>: channel number, n take value from 1, 2.
Return format：

Query returns the amplitude upper limit of the specified channel in scientific notation.
For example：

AWG:CHANnel1:LIMit:UPPer 2
AWG:CHANnel1:LIMit:UPPer?
AWG:CHANnel<n>:AMPLitude:UNIT
Command format：

AWG:CHANnel<n>:AMPLitude:UNIT {VPP | VRMS | DBM}
AWG:CHANnel<n>:AMPLitude:UNIT?
Functional description：

This command is used to set output amplitude unit of the specified channel.
<n>: channel number, n take value from 1, 2.
Return format：

Query returns output amplitude unit of the specified channel
For example：

AWG:CHANnel1:AMPLitude:UNIT VPP
Set output amplitude unit of channel 1 to VVP.
AWG:CHANnel1:AMPLitude:UNIT?
AWG:CHANnel<n>:MODe
Command format：

AWG:CHANnel<n>:MODe {BASE | MODulate}
AWG:CHANnel<n>:MODe?
Functional description：

This command is used to set the signal type of the specified channel. BASE represents fundamental wave
mode. MODulate represents modulating mode.
<n>: channel number, n take value from 1, 2.
Return format：

Query returns the signal type of the specified channel.
Instruments.uni-trend.com
Query returns 2e+0.
Set the amplitude upper limit of channel 1 to 2 V.
Query returns 2e+0.
Query returns VPP.
MSO/UPO2000 Series
112 / 156