UNI-T MSO/UPO2000 Series Programming Manual page 105

Programming Manual
:SBUS :POLarity
:FR
Command format：

:SBUS:FR:POLarity {BP | BM}
:SBUS:FR:POLarity?
Functional description：

This command is used to set FlexRay bus polarity of the oscilloscope, BP (Bdiff or BP).
Return format：

Query returns {BP | BM}.
For example：

:SBUS:FR:POLarity BP
:SBUS:FR:POLarity?
:SBUS :CHANnel:TYPE
:FR
Command format：

:SBUS:FR:CHANnel:TYPE {A | B}
:SBUS:FR:CHANnel:TYPE?
Functional description：

This command is used to set FlexRay bus channel type.
Return format：

Query returns {A | B}.
For example：

:SBUS:FR:CHANnel:TYPE A
:SBUS:FR:CHANnel:TYPE?
:SBUS :SIGNal:BAUDrate
:FR
Command format：

:SBUS:FR:SIGNal:BAUDrate {2.5M|5M|10M}
:SBUS:FR:SIGNal:BAUDrate?
Functional description：

This command is used to set baud rate of FlexRay bus signal of the oscilloscope.
Return format：

Query returns signal baud rate.
For example：

:SBUS:FR:SIGNal:BAUDrate 2.5M
:SBUS:FR:SIGNal:BAUDrate?
:SBUS:FR:QUALifier
Command format：

:SBUS:FR:QUALifier {START|IND|ID|CYCLES|HEAD|DATA|IDDATA|END|ERROR}
Instruments.uni-trend.com
Set FlexRay bus polarity to BP.
Query returns BP.
Set FlexRay channel type to A.
Query returns A.
Set baud rate of FlexRay bus signal to 2.5 Mbps.
Query returns 2.5 M.
MSO/UPO2000 Series
105 / 156