UNI-T MSO/UPO2000 Series Programming Manual page 47

Programming Manual
:SLOPe
:TRIGger
:SLOPe
:TRIGger
:TRIGger:SLOPe:THReshold
Command format：

:TRIGger:SLOPe:THReshold
:TRIGger:SLOPe:THReshold?
Functional description：

This command is used to set threshold mode of slop trigger.
Return format：

Query returns {LOW|HIGH|LH}.
For example：

:TRIGger:SLOPe:THR HIGH
:TRIGger:SLOPe:THR?
:TRIGger:SLOPe:RATe:LOWer?
Command format：

:TRIGger:SLOPe:RATe:LOWer?
Functional description：

Set the lower limit of the current slop trigger.
Return format：

Query returns the low limit of slope trigger in scientific notation.
For example：

:TRIGger:SLOPe:RATe:LOWer?
:TRIGger:SLOPe:RATe:UPPer?
Command format：

:TRIGger:SLOPe:RATe:UPPer?
Functional description：

Query Set the uuper limit of the current slop trigger.
Return format：

Query returns the upper limit of slope trigger in scientific notation.
For example：

:TRIGger:SLOPe:RATe:UPPer?
Instruments.uni-trend.com
:LOWer
:TIME 1
:LOWer
:TIME ?
{LOW|HIGH|LH}
Query returns 3.210E+000.
Query returns 3.210E+000.
Set the low time limit of slope trigger to 1s.
Query returns 1.000e000.
Set slope trigger threshold to HIGH.
Query returns HIGH.
MSO/UPO2000 Series
47 / 156