UNI-T MSO/UPO2000 Series Programming Manual page 9

Programming Manual
Return format：

Query returns { 10 Hz | 100 Hz | 1 kHz | 10 kHz }.
For example：

:SYSTem:SQUare:SELect 10 Hz
:SYSTem:SQUare:SELect?
:SYSTem:OUTPut:SELect
Command format：

:SYSTem:OUTPut:SELect
:SYSTem:OUTPut:SELect?
Functional description：

This command is used to set output selection TRIGger or PASS_FAIL（pass&fail）.
Return format：

Query returns { TRIGger | PASS_FAIL }.
For example：

:SYSTem:OUTPut:SELect TRIG
:SYSTem:OUTPut:SELect?
:SYSTem:MNUDisplay
Command format：

:SYSTem:MNUDisplay
:SYSTem:MNUDisplay?
Functional description：

This command is used to set the menu display time, INFinite represents the menu is always displayed.
Return format：

Query returns { 5S | 10S | 20S | INFinite }.
For example：

:SYSTem:MNUDisplay 5S
Set the menu display time to 5 s, the menu will automatically withdraw after 5 s.
:SYSTem:MNUDisplay?
:SYSTem:BRIGhtness
Command format：

:SYSTem:BRIGhtness
:SYSTem:BRIGhtness?
Functional description：

This command is used to set the screen brightness, <count> take value from 1~100, the bigger the number,
the brighter the screen.
Return format：

Query returns the current screen brightness.
For example：

:SYSTem:BRIGhtness 50
:SYSTem:BRIGhtness?
Instruments.uni-trend.com
Select 10 Hz square wave output.
Query returns 10 Hz.
{ TRIGger | PASS_FAIL }
Output selection sets to trigger.
Query returns TRIG.
{ 5S | 10S | 20S | INFinite}
Query returns 5 s.
<count>
Set screen brightness to 50.
Query returns 50.
MSO/UPO2000 Series
9 / 156