UNI-T MSO/UPO2000 Series Programming Manual page 35

Programming Manual
<source> is the specified channel and take value from CHANnel1, CHANnel2, CHANnel3 or CHANnel4. If
there is no assigned <source>, then the current channel as the default.
Return format：

Query returns 1.230e000, unit is V.
:MEASure:AREa?
Command format：

:MEASure:AREa? [<interval>], [<source>]
Functional description：

This command is used to measure the area of the specified channel waveform. <source> is the specified
channel and take value from CHANnel1, CHANnel2, CHANnel3 or CHANnel4. If there is no assigned <source>,
then the current channel as the default; <interval> specifies the measuring interval, take value from CYCLe,
DISPlay. CYCLe represents integer cycle, DISPlay represents full screen. If there is no assigned <interval>,
then DISPlay as the default.
Return format：

Query returns 3.456e002, unit is Vs.
:MEASure:OVERshoot?
Command format：

:MEASure:OVERshoot? [<source>]
Functional description：

This command is used to measure overshoot of the specified channel waveform. <source> take value from
CHANnel1, CHANnel2, CHANnel3 or CHANnel4. Omitting represents the current channel.
Return format：

Query returns 1.230e002, unit is %.
:MEASure:PREShoot?
Command format：

:MEASure:PREShoot? [<source>]
Functional description：

This command is used to measure preshoot of the specified channel waveform. <source> take value from
CHANnel1, CHANnel2, CHANnel3 or CHANnel4. Omitting represents the current channel.
Return format：

Query returns 1.230e-002, unit is %.
:MEASure:FREQuency?
Command format：

:MEASure:FREQuency? [<source>]
Functional description：

This command is used to measure frequency of the specified channel waveform. <source> take value from
CHANnel1, CHANnel2, CHANnel3 or CHANnel4. Omitting represents the current channel.
Return format：

Instruments.uni-trend.com
MSO/UPO2000 Series
35 / 156