UNI-T MSO/UPO2000 Series Programming Manual page 81

Programming Manual
This command is used to select bus decoding and trigger mode. FR representes FlexRay bus.
Return format：

Query returns { RS232 | I2C | SPI | CAN | CANFD | LIN | FR }.
For example：

:SBUS:MODE I2C
:SBUS:MODE?
:SBUS:BASE
Command format：

:SBUS:BASE {ASCII | BINary | HEX | DEC}
:SBUS:BASE?
Functional description：

This command is used to set bus display format of the oscilloscope.
Return format：

Query returns {ASCII | BINary | HEX | DEC}.
For example：

:SBUS:BASE BIN
:SBUS:BASE?
:SBUS:EVENt
Command format：

:SBUS:EVENt { {1|ON} | {0|OFF} }
:SBUS:EVENt?
Functional description：

This command is used to turn on/off bus event of the oscilloscope.
Return format：

Query returns 1 or 0, it respectively represents ON or OFF.
For example：

:SBUS:EVENt ON
:SBUS:EVENt?
:SBUS:DATA?
Command format：

:DATA?
:SBUS
Functional description：

This command is used read the data of decoding event table of the oscilloscope.
Return format：

Query returns the data of decoding event table, returned data is conform with Appendix 2： IEEE 488.2 binary
data format.
For example：

Instruments.uni-trend.com
Select I2C bus decoding mode.
Query returns I2C.
Set bus decoding to binary display format.
Query returns BINary.
Turn on bus event.
Query returns 1.
MSO/UPO2000 Series
81 / 156